Trailer Wiring For 00-04 Subaru Legacy Outback Light Kit Harness Kit Plug (Splice)
$61.03
- Stock: In Stock
- Brand: Tekonsha
- Model: 119180-67
This Product Fits The Following Vehicles:
2000 - 2004 Subaru, Legacy, Sedan, Except Outback
2000 - 2004 Subaru, Legacy, Wagon, Except Outback
2000 - 2004 Subaru, Outback, Sedan, Except Sport
ATTENTION:
THE WIRING KIT INCLUDED IN THIS PURCHASE IS NOT A T-CONNECTOR. INSTALLATION WILL REQUIRE SPLICING OF THE WIRES. A CUSTOM PLUG IS NOT AVAILABLE FOR YOUR VEHICLE MAKE AND MODEL
- The unit is rated for up to 2.1 amps for Turns/Stops circuits and 5.6 amps for the Taillight circuit
- Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off
- Will work with either LED/Incandescent bulbs (vehicle & trailer)
- Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
- Designed not to send feedback thru the vehicle circuits
- The trailer brakes will override the hazard lamps when the brake is activated
- The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the converter to turn on fully and gives the trailer lights full brightness during activation
- Will work with most vehicles that have a multiplex system for lighting
- Will not work with vehicles with low-side switch
- Can be used on a 2 wire or 3 wire system
- All solid-state components in potted encapsulation
- Includes integrated protective cover
- Installation Instructions
Thank you for choosing Tekonsha, the most powerful name in trailer light wiring and brake control system. Trailer wiring kit comes with a 1 year warranty and everything necessary to install the trailer plug wiring. Tekonsha manufactures a wider range of different products for hooking up trailer lights to your Car Truck or SUV. Our connectors work great with boat trailer wiring and utility trailer wiring. Typically those trailers will use the standard 4 flat plug which is what our Wiring Kits offer. If you have an RV Fifth Wheel or any other large type of trailer you will us a 7 pin trailer plug to control your electric trailer brakes. Tekonsha offers 7 pin trailer connector as well. Simply do a search above to see if there is a 7 wire trailer wiring available for hooking up your 7 way. If there is not you can use part number 85343 trailer wiring adapter to convert any 4-Flat into a 7-Way. In addition you will use part number 20506 which will include the rest of wiring needed for electric brake controls. You can also call us or email us any time and we will be able to provide information you need.
Partial list of fitment years: 00 01 02 03 04 2000 2001 2002 2003 2004
