For 1977-1984 Chevrolet K30 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller By Tow Ready

This Bundle Fits The Following Vehicles:

1977-1984 Chevrolet K30

This Bundle Includes the Following Parts:

• 7-Way RV Wiring
• Tekonsha Prodigy P2 Brake Control

List of fitment years: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984

Wiring Connector, 7-Way Trailer End, 7 ft. Length Wire Manufactured by: Tow Ready

The Wiring Connector is designed to allow remote wiring in pickup beds or other hard to access areas when towing a fifth wheel or gooseneck trailer, using an OEM USCAR connector. It features a durable plastic housing with a weather-tight seal.

Prodigy® P2 Proportional Brake Controller for Trailers with 1-4 Axles, Grey Manufactured by: Tekonsha

The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle - even in reverse gear. The P2 also cuts power to the trailer's brakes when your vehicle is stopped, extending the life of the magnets and brake shoes in the trailer's brake assemblies. In addition to proportional application of stopping power, the Prodigy P2 has a boost feature that provides more initial braking power for towing heavier loads. The boost setting sends 13 or 25 percent more power (depending on the selected setting) back to the trailer brakes, compensating for heavier loads. The Prodigy P2 is easy to install with its self-leveling feature and 360-degree vertical rotation. It includes continuous diagnostic checks for connection and magnet condition, as well as reverse battery protection and a power-save mode to reduce battery drain. With a portable design, the Prodigy P2 can be easily transferred between vehicles with the appropriate optional harness. An instructional DVD is included to assist with installation and operation.

• Reverse battery protection for both vehicle and breakaway
• Designed to work with electric over hydraulic brake systems
• Numerous mounting options - including 360 degree vertical rotation
• Digital display depicts voltage delivery to trailer during braking
• No level adjustment necessary - it adjusts itself to varying terrain as you drive
• Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed
• "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers
• Continual diagnostics check for proper connection, shorted magnet conditions and much more
• Quick and easy disconnect feature allows user to remove and store the control when not in use
• Electric trailer brake control for up to 4 braking axles
• Limited lifetime warranty