For 1981-1994 Dodge B150 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Primus IQ Brake Controller By Reese Towpower

This Bundle Fits The Following Vehicles:

1981-1994 Dodge B150

This Bundle Includes the Following Parts:

• 7-Way RV Wiring: The 7-Way RV Wiring is designed to provide a reliable and secure connection between your vehicle and trailer. It features a molded 4-Flat vehicle connector, 18 gauge bonded wire, and tin plated terminals. The ground wire runs the full length of the assembly and it is rated for 7.5 amps per circuit. The wiring conforms to SAE spec. J1128 standard for safety.
• Tekonsha Primus IQ Brake Control: The Tekonsha Primus IQ Brake Control is a totally proportional electric trailer brake control. It is self-leveling, so no level adjustment is necessary. It utilizes primary sensor technology from Prodigy and now includes the Boost feature, which allows users to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for easier backing up and includes a snap-in dash mounting clip and removable electrical connector for convenient storage when not in use. The included digital LED readout provides information on the secure electrical connection, voltage delivery to the trailer brakes, and diagnostic features.

List of fitment years:

1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994

Wiring Connector, 4-Way Flat Vehicle End, 48 in. Length Wire Manufactured by: Reese Towpower

The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end and includes 48 inches of wire with splice connectors. The included splice connectors make adding a 4-flat connector easy for most vehicle wiring systems. The wiring connector features 18 gauge bonded wire, a ground wire that runs the full length of the assembly, and tin plated terminals. The bolded wire gives a clean and neat appearance.

• Molded 4-Flat vehicle connector
• Features 18 gauge bonded wire
• Ground wire runs full length of assembly
• Tin plated terminals
• Bolded wire for a clean neat appearance
• Rated for 7.5 amps per circuit
• Conforms to SAE spec. J1128 standard

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

The REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat and the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat and 7-way round connector.

• Provides versatility in going from 4-way flat to 7-way round blade
• Sealed connection increases protection against moisture & corrosion
• Low profile design provides factory installed appearance
• Built with heavy-duty rugged materials
• Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
• Butt connectors pre-attached for quicker wiring
• Mounting bracket included
• Mounting hardware included

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

The Tow Ready Trailer Brake Controller Installation Kit includes all the necessary parts required for a complete installation of all brake controls. No other parts are necessary, making it easy to set up and get your trailer braking system ready.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

The Tekonsha Circuit Breaker is a 30 Amp breaker used in 6, 12, and 24V DC applications. It is suitable for automotive, R.V., air conditioners, battery chargers, or any application requiring over-current protection. The non-corrosive molded cover eliminates grounding when operating against a fault line. The breaker includes a mounting bracket and pre-installed nuts and washers.

Primus® IQ, Proportional Brake Controller for Trailers with 1-3 Axles, Grey Manufactured by: Tekonsha

A totally proportional electric trailer brake control, the new Primus®IQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy®, the Primus®IQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes, and diagnostic features incorporated in the LED display.

• Utilizes Plug-N-Play port for 2-plug adapters
• Self-diagnostics features will illuminate LED readout when issues occur
• Includes a Boost feature
• Works proportionally in reverse
• Snap-in dash mounting clip and hardware included
• Digital LED readout
• Limited lifetime warranty