For 1981-1994 Dodge B350 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha BRAKE-EVN Brake Controller + Wiring Adapter By Reese Towpower

This Bundle Fits The Following Vehicles:

1981-1994 Dodge B350

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  The 7-Way RV Wiring is designed to provide a secure and reliable connection between the towing vehicle and the trailer. It features a molded 7-way RV connector and is rated for 7.5 amps per circuit. The wiring is made from 18 gauge bonded wire with a ground wire that runs the full length of the assembly. The tin plated terminals ensure a solid connection, and the bolded wire gives it a clean and neat appearance. It conforms to SAE spec J1128 standard.

• Tekonsha BRAKE-EVN Brake Control

  The Tekonsha BRAKE-EVN Brake Control offers advanced proportional braking for trailers with 1-4 axles. It applies brake pressure to match the vehicle's deceleration rate, resulting in smoother stops. The boost feature allows for more initial braking when towing heavier loads. Proportional brake controls can even extend the life of your vehicle's brakes. The large LED display makes it easy to adjust the control for your loaded or unloaded trailer. It can handle up to 4 axles and offers a simple plug and play installation option.

• Generic BC Wiring Adapter

  The Generic BC Wiring Adapter is a 7-way flat to 4-way flat adapter. It provides versatility in going from a 4-way flat connector to a 7-way round blade connector. It is designed with a sealed connection to increase protection against moisture and corrosion. The low-profile design provides a factory-installed appearance. It is built with heavy-duty rugged materials and comes with a 4-flat dust cover and a heavy-duty spring on the 7-way connector. The butt connectors are pre-attached for quicker wiring. The mounting bracket and hardware are included.

List of fitment years:

1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994

Wiring Connector, 4-Way Flat Vehicle End, 48 in. Length Wire Manufactured by: Reese Towpower

The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end and includes 48 in. of wire with splice connectors. The included splice connectors make adding a 4-flat connector easy for most vehicle wiring systems. The wiring connector features a molded 4-flat vehicle connector and is made with 18 gauge bonded wire. The ground wire runs the full length of the assembly and the terminals are tin plated. The bolded wire gives it a clean and neat appearance. It is rated for 7.5 amps per circuit and conforms to SAE spec J1128 standard.

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

The REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The wiring adapter converts the vehicle's 4-way flat to a flexible, two-port connector, offering both the 4-way flat and 7-way round connector. It is designed with a sealed connection to increase protection against moisture and corrosion. The low-profile design provides a factory-installed appearance. It is built with heavy-duty rugged materials and comes with a 4-flat dust cover and a heavy-duty spring on the 7-way connector. The butt connectors are pre-attached for quicker wiring. The mounting bracket and hardware are included.

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

The Trailer Brake Controller Installation Kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary. This kit ensures a hassle-free and seamless installation of your brake controller.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

The Tekonsha Circuit Breaker is used in 6, 12, and 24V DC applications. It is suitable for automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. It features a non-corrosive molded cover that eliminates grounding when operating against a fault line. The circuit breaker includes a mounting bracket and installed nuts and washers.

BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

The Tekonsha BRAKE-EVN Brake Controller offers advanced proportional braking for trailers with 1-4 axles. It applies brake pressure to match the vehicle's deceleration rate, resulting in smoother stops. The boost feature allows for more initial braking at the onset of stopping when towing heavier loads. Proportional brake controls can even extend the life of your vehicle's brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN Brake Control can handle up to 4 axles and offers a simple plug and play installation option. It is the perfect choice for light or heavy trailer loads.

Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length Manufactured by: Tekonsha

This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging. It features an OEM-style wiring harness with quick and easy plug-in connections. It allows the controller to be unplugged and moved to other vehicles. The color-coded wires match brake control standards and work on both time proportional and time-based controls. The positive locking connector stays connected tightly, and simple do-it-yourself instructions are included on every package. It fits REESE Towpower and Tekonsha brake controllers.