For 1984-1990 Jeep Wagoneer 7 Way Trailer Wiring RV 7 Pin 7 Blade + Pro Series POD Brake Controller + Wiring Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

1984-1990 Jeep Wagoneer

This Bundle Includes the Following Parts:

• Taillight Converter with Integrated Circuit Protection Manufactured by: Tekonsha

  • This unit rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
  • Adapts import and domestic vehicles with separate turn and stop lights (3 wire system to standard trailer taillight wiring (2 wire system)
  • Will work with either LED/Incandescent bulbs (vehicle & trailer)
  • Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • Designed not to send feedback thru the vehicle circuits
  • All solid-state components in potted encapsulation
  • Will not work with vehicles with low-side switch
  • Includes integrated protective cover

• Wiring Adapter, 4-Way Flat to 7-Way, Round Car End Manufactured by: Reese Towpower

  • The REESE Towpower pre-wired round blade 7-way connector, provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits.
  • Provide versatility in going from 4-Flat to 7-Way standard plug
  • Pre-wired with 4-Flat and wired with butt connects and ring terminal
  • Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal
  • Features non-corroding brass terminals
  • Mounts to standard 7-Way bracket
  • Non-corrosive thermo plastic construction
  • Ring terminal already mounted to ground wire
  • 12 volt and brake wires have butt connectors already attached

• Trailer Brake Controller Installation Kit, Wire and Hardware Manufactured by: Tekonsha

  • This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.
  • OEM Style wiring harness
  • Easy to install
  • 1-3 axles

• Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts Manufactured by: Tow Ready

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts
  • Attractive point-of-purchase packaging

• POD® Trailer Time-Delay Brake Controller for Trailers with 1-2 Axles Manufactured by: Pro Series

  • POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction, and features “up-front-easy-access” adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mounting surfaces.
  • Solid state electronics
  • Power-on LED for a positive tow vehicle-to-trailer connection
  • “Up- front” manual over-ride control
  • Rugged, easy mount chassis
  • Mounting hardware included
  • Smooth and simple installation
  • Plug & Play feature allows quick and easy connection
  • 5 year limited warranty

• Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length Manufactured by: Tekonsha

  • This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging.
  • OEM style wiring harness
  • Quick and easy plug in connections
  • Allows controller to be unplug and moved to other vehicles
  • Color coded wire match brake control standards
  • Works on time proportional and time based controls
  • Positive locking connector stays connected when plug in tightly
  • Simple do it yourself instructions on every package
  • Fits REESE Towpower and Tekonsha brake controllers

List of fitment years:

1984, 1985, 1986, 1987, 1988, 1989, 1990