This Bundle Fits The Following Vehicles:

1986-1996 Ford Aerostar

This Bundle Includes the Following Parts:

• 7-Way RV Wiring
• Tekonsha BRAKE-EVN Brake Control
• Generic BC Wiring Adapter

List of fitment years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996

Taillight Converter with Integrated Circuit Protection Manufactured by: Tekonsha

This unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit. It adapts import and domestic vehicles with separate turn and stop lights (3 wire system) to standard trailer taillight wiring (2 wire system). It will work with either LED/Incandescent bulbs in both the vehicle and trailer. The taillight converter has integrated re-settable Short Circuit and Overload protection, which safeguards itself and the tow vehicle from shorts and installation wiring mishaps. It is also designed not to send feedback through the vehicle circuits and includes an integrated protective cover.

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

The REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat and 7-way round connector. It provides versatility in going from a 4-way flat to a 7-way round blade. The sealed connection increases protection against moisture and corrosion. The low profile design provides a factory installed appearance. It is built with heavy duty rugged materials and includes a 4-Flat dust cover and heavy duty spring on the 7-Way connector. The butt connectors are pre-attached for quicker wiring. A mounting bracket and mounting hardware are also included.

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

This installation kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

This circuit breaker is used in 6, 12, and 24V DC applications such as automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. The non-corrosive molded cover eliminates grounding when operating against a fault line. It includes a mounting bracket and installed nuts and washers.

BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

The Tekonsha BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicle's deceleration rate. Proportional braking provides smoother stops than traditional time-based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. Proportional brake controls can even extend the life of your vehicle's brakes when adjusted properly for your load. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to 4 axles and offers a simple plug-in installation option. Be sure to get the proper factory harness for your vehicle. It is the perfect choice for light or heavy trailer loads. It has a compact design and features simple push button adjustments. Reverse battery protection is included and no leveling is required. The control also offers diagnostics features incorporated in an easy-to-read LED display.

Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length Manufactured by: Tekonsha

This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging. It is an OEM style wiring harness with quick and easy plug-in connections. The harness allows the controller to be unplugged and moved to other vehicles. The color-coded wires match brake control standards and works on time proportional and time-based controls. The positive locking connector stays connected when plugged in tightly. Simple do-it-yourself instructions are included on every package. The harness fits REESE Towpower and Tekonsha brake controllers.