For 1988-2000 Chevrolet C35 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller By Tow Ready

This Bundle Fits The Following Vehicles:
1988-2000 Chevrolet C35

This Bundle Includes the Following Parts:
7-Way RV Wiring
Tekonsha Prodigy P2 Brake Control

List of fitment years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000

---

Wiring Connector, 7-Way Trailer End, 7 ft. Length Wire

Manufactured by: Tow Ready
The Wiring Connector allows for remote wiring in pickup beds or other hard to access areas when towing a fifth wheel or gooseneck trailer. It features an OEM USCAR connector and a durable plastic housing with a weather-tight seal for added protection.

---

Prodigy® P2 Proportional Brake Controller for Trailers with 1-4 Axles, Grey

Manufactured by: Tekonsha
The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally, ensuring that your trailer brakes at the same time and with the same strength as your vehicle, even in reverse gear. This eliminates any delay in the trailer's braking response when you slam on your truck's brakes. As a result, your vehicle's brakes aren't overworked and experience less wear and tear, extending their longevity compared to time-based controls.

The P2 also features a boost feature that gives you more initial braking power for towing heavier loads. This boost setting sends 13 or 25 percent more power to the trailer brakes, compensating for the additional load. You can easily adjust the power manually at the push of a button. The self-leveling feature ensures that the brake controller functions effectively on steep hills or when towing through the mountains.

The Prodigy P2 brake controller is easy to install, with a 360-degree rotation mount and a display that is easy to read. It comes with a continuous diagnostic check that monitors your connection and magnet condition, allowing you to fix any issues before they become problematic. The reverse battery protection preserves the unit and accessory systems, while the power-save mode reduces battery drain when the controller is not in use.

The Prodigy P2 brake controller includes a mounting pocket for easy transfer to another vehicle. Simply unplug the unit and plug it into another vehicle with the appropriate optional harness (sold separately). No hard-wiring is required. The brake controller also comes with an instructional DVD to help you make the most of its features. It is suitable for electric over hydraulic brake systems and can control up to 4 braking axles.

Key Features:
- Reverse battery protection for both vehicle and breakaway
- Designed to work with electric over hydraulic brake systems
- Numerous mounting options, including 360-degree vertical rotation
- Digital display shows voltage delivery to the trailer during braking
- No level adjustment necessary, self-adjusts to varying terrain
- Proportional braking in reverse with the ability to disable when not needed
- "Boost" feature provides additional trailer braking power for heavier loads
- Continual diagnostics check for proper connection and magnet conditions
- Quick and easy disconnect feature for storage when not in use
- Electric trailer brake control for up to 4 braking axles
- Limited lifetime warranty

---

Order today or call us at 877-869-6690 for expert advice and personalized service.