For 1994-1996 Ford F-250 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha BRAKE-EVN Brake Controller + Plug & Play Adapter By Tow Ready

This Bundle Fits The Following Vehicles:

• 1994-1996 Ford F-250

This Bundle Includes the Following Parts:

1. 7-Way RV Wiring

   Wiring Connector, 7-Way Trailer End, 7 ft. Length Wire Manufactured by: Tow Ready

   Allows remote wiring in pickup beds or other hard to access areas when towing a fifth wheel or gooseneck trailer, using an OEM USCAR connector. Features durable plastic housing with weather tight seal.

2. Tekonsha BRAKE-EVN Brake Control

   BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

   The Tekonsha BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicles deceleration rate. Proportional braking gets you get smoother stops that traditional time based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. When adjusted properly for your load, proportional brake controls can even extend the life of your vehicles brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to brake 4 axles and offers a simple plug in installation option, so be sure to get the proper factory harness for your vehicle. The perfect choice for light or heavy trailer loads.

   • 1-4 Axle capacity
   • Boost feature gives ability to apply more initial trailer braking
   • Reverse battery protection
   • No leveling required
   • Diagnostics features incorporated in easy to read LED display
   • Plug & Play feature allows for quick and easy connections
   • Small compact design designed for todays dashes
   • Simple push button adjustments

3. Plug & Play BC Adapter

   Trailer Brake Controller Wiring Harness Manufactured by: Tekonsha

   Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years:

• 1994
• 1995
• 1996