For 1995-2002 Dodge Ram 2500 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller + Plug & Play Adapter By Tow Ready

This Bundle Fits The Following Vehicles:

1995-2002 Dodge Ram 2500

This Bundle Includes the Following Parts:

• 7-Way RV Wiring
• Tekonsha Prodigy P2 Brake Control
• Plug & Play BC Adapter

List of fitment years:

1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002

Wiring Connector - 7-Way Trailer End

Manufactured by: Tow Ready

The Wiring Connector allows for remote wiring in pickup beds or other hard to access areas when towing a fifth wheel or gooseneck trailer. It uses an OEM USCAR connector and features a durable plastic housing with weather tight seal.

Prodigy® P2 Proportional Brake Controller for Trailers with 1-4 Axles, Grey

Manufactured by: Tekonsha

The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle - even in reverse gear. The P2 also cuts power to the trailer's brakes when your vehicle is stopped, extending the life of the magnets and brake shoes in the trailer's brake assemblies. The Prodigy P2 has a boost feature that gives you more initial braking power for heavier loads and automatically levels itself as you drive. It also includes a continuous diagnostic check and a power-save mode. The brake controller comes with a mounting pocket for easy transfer between vehicles.

• Reverse battery protection for both vehicle and breakaway
• Designed to work with electric over hydraulic brake systems
• Numerous mounting options - including 360 degree vertical rotation
• Digital display depicts voltage delivery to trailer during braking
• No level adjustment necessary - it adjusts itself to varying terrain as you drive
• Works proportionally in reverse with the ability to disable when not needed
• Produces stops that are in proportion to vehicle's deceleration rate
• "Boost" feature gives more initial trailer braking power for heavier trailers
• Continual diagnostics check for proper connection and shorted magnet conditions
• Quick and easy disconnect feature allows user to remove and store the control when not in use
• Electric trailer brake control for up to 4 braking axles
• Limited lifetime warranty

Trailer Brake Controller Wiring Harness

Manufactured by: Tekonsha

Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.