For 1996-1999 Chevrolet Express Van 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller By Tekonsha

This Bundle Fits The Following Vehicles:

1996-1999 Chevrolet Express Van

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Manufactured by: Tekonsha

• Tekonsha Prodigy P2 Brake Control

  Manufactured by: Tekonsha

List of fitment years:

1996, 1997, 1998, 1999

Taillight Converter with Integrated Circuit Protection

Manufactured by: Tekonsha

• This unit rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
• Adapts import and domestic vehicles with separate turn and stop lights (3 wire system) to standard trailer taillight wiring (2 wire system)
• Works with LED/Incandescent bulbs for both vehicle and trailer
• Has integrated re-settable Short Circuit and Overload protection
• Designed not to send feedback through the vehicle circuits
• All solid-state components in potted encapsulation
• Will not work with vehicles with low-side switch
• Includes integrated protective cover

Wiring Adapter, 7-Way Flat to 4-Way Flat

Manufactured by: Reese Towpower

• Provides versatility in going from 4-way flat to 7-way round blade
• Sealed connection increases protection against moisture and corrosion
• Low profile design provides factory installed appearance
• Built with heavy-duty rugged materials
• Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
• Butt connectors pre-attached for quicker wiring
• Mounting bracket included
• Mounting hardware included

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp

Manufactured by: Tekonsha

Used in 6, 12, and 24V DC applications. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.

Prodigy® P2 Proportional Brake Controller for Trailers with 1-4 Axles, Grey

Manufactured by: Tekonsha

The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. It ensures smooth and efficient braking for your trailer, even in reverse gear. The controller features a boost setting for towing heavier loads and a continuous diagnostic check for proper connection and magnet condition. It is easy to install and comes with a portable mounting pocket. The P2 also has reverse battery protection and power-saving mode to preserve battery life. It is backed by a limited lifetime warranty.

• Reverse battery protection for both vehicle and breakaway
• Designed to work with electric over hydraulic brake systems
• Numerous mounting options - including 360-degree vertical rotation
• Digital display depicts voltage delivery to trailer during braking
• No level adjustment necessary - it adjusts itself to varying terrain
• Works proportionally in reverse with the ability to disable when not needed
• Produces stops that are in proportion to the vehicle's deceleration rate
• Boost feature gives more initial trailer braking power for heavier trailers
• Continual diagnostics check for proper connection and shorted magnet conditions
• Quick and easy disconnect feature for convenient storage
• Electric trailer brake control for up to 4 braking axles
• Limited lifetime warranty