For 1997-2005 Chevrolet Venture 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha BRAKE-EVN Brake Controller + Wiring Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

1997-2005 Chevrolet Venture

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  The 7-Way RV Wiring is designed to adapt import and domestic vehicles with separate turn and stop lights to standard trailer taillight wiring. It is compatible with both LED and incandescent bulbs and has integrated circuit protection to safeguard against shorts and wiring mishaps. This wiring adapter does not send feedback through the vehicle circuits and includes an integrated protective cover.

  Manufactured by: Tekonsha

  • This unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
  • Adapts import and domestic vehicles with separate turn and stop lights (3 wire system to standard trailer taillight wiring (2 wire system)
  • Will work with either LED/Incandescent bulbs (vehicle & trailer)
  • Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • Designed not to send feedback thru the vehicle circuits
  • All solid-state components in potted encapsulation
  • Will not work with vehicles with low-side switch
  • Includes integrated protective cover

• Tekonsha BRAKE-EVN Brake Control

  The Tekonsha BRAKE-EVN Brake Control offers advanced proportional braking for trailers with 1-4 axles. It applies brake pressure to match the vehicle's deceleration rate, providing smoother stops and extending the life of the vehicle's brakes. This brake control has a boost feature for additional braking power when towing heavier loads, a large LED display for easy adjustment, and a simple plug-in installation option (requires proper factory harness).

  Manufactured by: Tekonsha

  • 1-4 Axle capacity
  • Boost feature gives ability to apply more initial trailer braking
  • Reverse battery protection
  • No leveling required
  • Diagnostics features incorporated in easy to read LED display
  • Plug & Play feature allows for quick and easy connections
  • Small compact design designed for today's dashes
  • Simple push button adjustments

• Generic BC Wiring Adapter

  The Generic BC Wiring Adapter is a 7-way flat to 4-way flat wiring adapter, offering both the versatility of a 4-way flat and the capabilities of a 7-way round connector. It has a low profile design for a factory-installed appearance, is built with heavy-duty rugged materials, and includes a 4-flat dust cover and heavy-duty spring on the 7-way connector. The included butt connectors make for quicker wiring and a mounting bracket is also included.

  Manufactured by: Reese Towpower

  • Provide versatility in going from 4 way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory installed appearance
  • Built with heavy duty rugged materials
  • Included 4-Flat dust cover and heavy duty spring on 7-Way connector
  • Butt connectors pre attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  The Trailer Brake Controller Installation Kit includes all necessary parts required to completely install all brake controls. No other parts are necessary. This kit ensures a hassle-free and comprehensive installation process.

  Manufactured by: Tow Ready

• Circuit Breaker, 30 Amp

  The Circuit Breaker is a 30 Amp breaker used in 6, 12, and 24V DC applications. It is suitable for automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. The non-corrosive molded cover eliminates grounding against a fault line and includes a mounting bracket and installed nuts and washers.

  Manufactured by: Tekonsha

• Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length

  The Universal Fit Trailer Brake Controller Installation Kit is designed to mate with any Tekonsha brake controller. It features OEM-style wiring harness with quick and easy plug-in connections, allowing the controller to be easily unplugged and moved to other vehicles. The color-coded wire matches brake control standards and the positive locking connector stays connected tightly. The package includes simple do-it-yourself instructions.

  Manufactured by: Tekonsha

  • OEM style wiring harness
  • Quick and easy plug in connections
  • Allows controller to be unplug and moved to other vehicles
  • Color coded wire match brake control standards
  • Works on time proportional and time based controls
  • Positive locking connector stays connected when plug in tightly
  • Simple do it yourself instructions on every package
  • Fits REESE Towpower and Tekonsha brake controllers