For 1999-2005 Pontiac Montana 7 Way Trailer Wiring RV 7 Pin 7 Blade + Pro Series POD Brake Controller + Wiring Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

• 1999-2005 Pontiac Montana

This Bundle Includes the Following Parts:

1. 7-Way RV Wiring
2. Pro Series POD Brake Control
3. Generic BC Wiring Adapter

List of fitment years:

1999, 2000, 2001, 2002, 2003, 2004, 2005

Taillight Converter with Integrated Circuit Protection Manufactured by: Tekonsha

This unit rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit Adapts import and domestic vehicles with separate turn and stop lights (3 wire system to standard trailer taillight wiring (2 wire system) Will work with either LED/Incandescent bulbs (vehicle & trailer) Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps Designed not to send feedback thru the vehicle circuits All solid-state components in potted encapsulation Will not work with vehicles with low-side switch Includes integrated protective cover

Wiring Adapter, 4-Way Flat to 7-Way, Round Car End Manufactured by: Reese Towpower

The REESE Towpower pre-wired round blade 7-way connector provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits. Provide versatility in going from 4-Flat to 7-Way standard plug Pre-wired with 4-Flat and wired with butt connects and ring terminal Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal Features non-corroding brass terminals Mounts to standard 7-Way bracket Non-corrosive thermo plastic construction Ring terminal already mounted to ground wire 12 volt and brake wires have butt connectors already attached

Trailer Brake Controller Installation Kit, Wire and Hardware Manufactured by: Tekonsha

This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle. OEM Style wiring harness Easy to install 1-3 axles

Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts Manufactured by: Tow Ready

Mounts electrical connector to attachment bracket Includes screws and nuts Attractive point-of-purchase packaging

POD® Trailer Time-Delay Brake Controller for Trailers with 1-2 Axles Manufactured by: Pro Series

POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction and features “up-front-easy-access” adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mounting surfaces. Solid state electronics Power-on LED for a positive tow vehicle-to-trailer connection “Up- front” manual over-ride control Rugged, easy mount chassis Mounting hardware included Smooth and simple installation Plug & Play feature allows quick and easy connection 5-year limited warranty

Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length Manufactured by: Tekonsha

This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging. OEM style wiring harness Quick and easy plug-in connections Allows controller to be unplugged and moved to other vehicles Color-coded wire match brake control standards Works on time proportional and time-based controls Positive locking connector stays connected when plug in tightly Simple do-it-yourself instructions on every package Fits REESE Towpower and Tekonsha brake controllers