This Bundle Fits The Following Vehicles:

1999-2003 Ford Windstar (Built Before 11/2002)

This Bundle Includes the Following Parts:

• 7-Way RV Wiring w/ Zero Contact ZCI Module

  Manufactured by: Tekonsha

  ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12-volt system only.

  • NO CUTTING OR SPLICING VEHICLE WIRING!
  • Isolates Trailer Light Operation from Tow Vehicle's Electrical System
  • Works with 2 or 3 wire systems
  • Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup
  • Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
  • Works with low side switched vehicles
  • Integrated auto resetting short & overload protection
  • Robust design allows for interior or exterior mounting

• Wiring Adapter, 4-Way Flat to 7-Way, Round Car End

  Manufactured by: Reese Towpower

  The Reese Towpower pre-wired round blade 7-way connector provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits.

  • Provide versatility in going from 4-Flat to 7-Way standard plug
  • Pre-wired with 4-Flat and wired with butt connects and ring terminal
  • Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal
  • Features non-corroding brass terminals
  • Mounts to standard 7-Way bracket
  • Non-corrosive thermo plastic construction
  • Ring terminal already mounted to ground wire
  • 12-volt and brake wires have butt connectors already attached

• Trailer Brake Controller Installation Kit, Wire, and Hardware

  Manufactured by: Tekonsha

  This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

  • OEM Style wiring harness
  • Easy to install
  • 1-3 axles

• Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts

  Manufactured by: Tow Ready

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts
  • Attractive point-of-purchase packaging

• Pilot® Trailer Time-Delay Brake Controller for Trailers with 1-3 Axles

  Manufactured by: Pro Series

  The Pilot has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. Pilot has flexible mounting options and can be installed in any direction. Our microprocessor allows you the ability to read the display even when mounted upside down. The Pilot’s digital display shows voltage output to the brakes.

  • Large easy to read dual digital display shows:
  • Properly wired control
  • Voltage output to brakes (vs. a percentage)
  • Connection to trailer
  • Dark smoke lens ideal for direct light applications; performs better than red lens
  • Protection against short circuit/loss of ground
  • Microprocessor allows control to be mounted upside down and still have a readable display
  • Standard mounting bracket included with optional ball mount available
  • For use on any 12-volt negative ground system
  • Plug & Play feature allows quick and easy connection
  • Limited lifetime warranty

• Trailer Brake Controller Wiring Harness

  Manufactured by: Tekonsha

  Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years: 1999, 2000, 2001, 2002, 2003