For 1999-2003 Ford Windstar 7 Way Trailer Wiring RV 7 Pin 7 Blade w/ Zero Contact ZCI Module + Tekonsha Primus IQ Brake Controller + Plug & Play Adapter (For (Built Before 11/2002) Models) By Tekonsha

This Bundle Fits The Following Vehicles:

1999-2003 Ford Windstar (Built Before 11/2002)

This Bundle Includes the Following Parts:

• 7-Way RV Wiring w/ Zero Contact ZCI Module

• Tekonsha Primus IQ Brake Control

• Plug & Play BC Adapter

List of Fitment Years:

1999, 2000, 2001, 2002, 2003

ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit Manufactured by: Tekonsha

ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12 volt system only.

• NO CUTTING OR SPLICING VEHICLE WIRING!

• Isolates Trailer Light Operation from Tow Vehicle's Electrical System

• Works with 2 or 3 wire systems

• Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup

• Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits

• Works with low side switched vehicles

• Integrated auto resetting short & overload protection

• Robust design allows for interior or exterior mounting

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector.

• Provide versatility in going from 4 way flat to 7-Way round blade

• Sealed connection increases protection against moisture & corrosion

• Low profile design provides factory installed appearance

• Built with heavy duty rugged materials

• Included 4-Flat dust cover and heavy duty spring on 7-Way connector

• Butt connectors pre attached for quicker wiring

• Mounting bracket included

• Mounting hardware included

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.

Primus® IQ, Proportional Brake Controller for Trailers with 1-3 Axles, Grey Manufactured by: Tekonsha

A totally proportional electric trailer brake control, the new Primus®IQ is self-leveling so no level adjustment is necessary.

Utilizing the primary sensor technology from Prodigy®, the Primus®IQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display.

• Utilizes Plug-N-Play port for 2-plug adapters.

• Self-diagnostics features will illuminate LED readout when issues occur.

• Includes a Boost feature.

• Works proportionally in reverse.

• Snap-in dash mounting clip and hardware included.

• Digital LED readout.

• Limited lifetime warranty.

Trailer Brake Controller Wiring Harness Manufactured by: Tekonsha

Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.