This Bundle Fits The Following Vehicles:

2006-2010 Dodge Charger

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end, and includes 48 In. of wire with splice connectors. The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems.

  • Molded 4-Flat vehicle connector
  • Features 18 gauge bonded wire
  • Ground wire runs full length of assembly
  • Tin plated terminals
  • Bolded wire for a clean neat appearance
  • Rated for 7.5 amps per circuit
  • Conforms to SAE spec. J1128 standard

• Pro Series Pilot Brake Control

  The Pilot brake controller from Pro Series has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. It has flexible mounting options and can be installed in any direction. The Pilot’s digital display shows voltage output to the brakes.

  • Large easy to read dual digital display shows:
  • Properly wired control
  • Voltage output to brakes (vs. a percentage)
  • Connection to trailer
  • Dark smoke lens ideal for direct light applications; performs better than red lens
  • Protection against short circuit/loss of ground
  • Microprocessor allows control to be mounted upside down and still have a readable display
  • Standard mounting bracket included with optional ball mount available
  • For use on any 12 volt negative ground system
  • Plug & Play feature allows quick and easy connection
  • Limited lifetime warranty

• Generic BC Wiring Adapter

  The REESE Towpower pre-wired round blade 7-way connector provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits.

  • Provide versatility in going from 4-Flat to 7-Way standard plug
  • Pre-wired with 4-Flat and wired with butt connects and ring terminal
  • Features non-corroding brass terminals
  • Mounts to standard 7-Way bracket
  • Non-corrosive thermo plastic construction
  • Ring terminal already mounted to ground wire
  • 12 volt and brake wires have butt connectors already attached

• Trailer Brake Controller Installation Kit

  This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

  • OEM Style wiring harness
  • Easy to install
  • 1-3 axles

• Mounting Bracket

  The mounting bracket is designed to mount the electrical connector to the attachment bracket. It includes screws and nuts for easy installation. The package comes in an attractive point-of-purchase packaging.

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts

• Trailer Brake Controller Installation Kit, Universal Fit

  This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging.

  • OEM style wiring harness
  • Quick and easy plug in connections
  • Allows controller to be unplug and moved to other vehicles
  • Color coded wire match brake control standards
  • Works on time proportional and time based controls
  • Positive locking connector stays connected when plug in tightly
  • Simple do it yourself instructions on every package
  • Fits REESE Towpower and Tekonsha brake controllers