For 2008-2020 Ford F-250 Super Duty 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Primus IQ Brake Controller + Plug & Play Adapter By Reese Towpower

This Bundle Fits The Following Vehicles:

2008-2020 Ford F-250 Super Duty

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Manufactured by: Reese Towpower

  The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end and includes 48 In. of wire with splice connectors. The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems. It features a molded 4-Flat vehicle connector with 18 gauge bonded wire and a ground wire that runs the full length of the assembly. The tin plated terminals and bolded wire ensure a clean and neat appearance. Rated for 7.5 amps per circuit, it conforms to SAE spec. J1128 standard.

• Tekonsha Primus IQ Brake Control

  Manufactured by: Tekonsha

  A totally proportional electric trailer brake control, the new Primus®IQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy®, the Primus®IQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, the amount of voltage delivery to the trailer brakes, and diagnostic features incorporated in the LED display. The Primus®IQ utilizes a Plug-N-Play port for 2-plug adapters, has self-diagnostics features that illuminate the LED readout when issues occur, and comes with a limited lifetime warranty.

• Plug & Play BC Adapter

  Manufactured by: Reese Towpower

  The REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two-port connector, offering both the 4-way flat and 7-way round connector. It provides versatility, increased protection against moisture and corrosion, a low profile design for a factory-installed appearance, and is built with heavy-duty rugged materials. It includes a 4-Flat dust cover, heavy-duty spring on the 7-Way connector, pre-attached butt connectors for quicker wiring, a mounting bracket, and all necessary mounting hardware.

• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  Manufactured by: Tow Ready

  This kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary for installation.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  This circuit breaker is used in 6, 12, and 24V DC applications. It is suitable for automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. The non-corrosive molded cover eliminates grounding when operating against a fault line. The breaker includes a mounting bracket and installed nuts and washers.

• Trailer Brake Controller Wiring Harness

  Manufactured by: Tekonsha

  Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years:

2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020