For 2008-2020 Ford F-350 Super Duty 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Brakeman IV Brake Controller + Plug & Play Adapter By Reese Towpower

This Bundle Fits The Following Vehicles:

2008-2020 Ford F-350 Super Duty

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Wiring Connector, 4-Way Flat Vehicle End, 48 in. Length Wire Manufactured by: Reese Towpower

  The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end, and includes 48 In. of wire with splice connectors. The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems.

  • Molded 4-Flat vehicle connector
  • Features 18 gauge bonded wire
  • Ground wire runs full length of assembly
  • Tin plated terminals
  • Bolded wire for a clean neat appearance.
  • Rated for 7.5 amps per circuit
  • Conforms to SAE spec. J1128 standard

• Tekonsha Brakeman IV Brake Control

  Brakeman® IV Time-Delay Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

  The Tekonsha Brakeman IV digital brake control is designed to handle from one to four braking axles and includes a digital display. The digital display indicates the amount of voltage power being delivered to the brakes and assists in accurately adjusting the trailer brakes for city or highway driving. Separate adjustment controls (Output & Sync) allow for not only the different weights (Output) of trailers, but also the speed of activation (Sync) depending on your driving style.

  • Small compact design
  • Easy push button adjustment for output and sync
  • Plug and play feature allows quick and easy connection
  • Digital Display output setting, sync setting, brake overload or short connection
  • Advanced internal circuit protection
  • No leveling required
  • Mounts in any direction
  • For use on 12 volt negative ground systems only

• Plug & Play BC Adapter

  Wiring Adapter, 4-Way Flat to 7-Way, Round Car End Manufactured by: Reese Towpower

  The REESE Towpower pre-wired round blade 7-way connector, provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits.

  • Provide versatility in going from 4-Flat to 7-Way standard plug
  • Per-wired with 4-Flat and wired with butt connects and ring terminal
  • Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal
  • Features non-corroding brass terminals
  • Mounts to standard 7-Way bracket
  • Non-corrosive thermo plastic construction
  • Ring terminal already mounted to ground wire
  • 12 volt and brake wires have butt connectors already attached

• Trailer Brake Controller Installation Kit

  Trailer Brake Controller Installation Kit, Wire and Hardware Manufactured by: Tekonsha

  This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

  • OEM Style wiring harness
  • Easy to install
  • 1-3 axles

• Mounting Bracket

  Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts Manufactured by: Tow Ready

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts
  • Attractive point-of-purchase packaging

• Trailer Brake Controller Wiring Harness

  Trailer Brake Controller Wiring Harness Manufactured by: Tekonsha

  Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years:

2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020