For 2008-2016 Ford F-450 Super Duty Industry Standard Semi-Custom Above Bed Rail Kit + 20K Fifth Wheel + Round Tube Slider (For 6-1/2' or Shorter Bed, w/o Factory Puck System Models) By Reese

This Bundle Fits The Following Vehicles:

2008-2016 Ford F-450 Super Duty 6-1/2' or Shorter Bed, Except Cab & Chassis, w/o Factory Puck System

This Bundle Includes the Following Parts:

• Industry Standard Semi-Custom Above Bed Rail Kit
• 20K Fifth Wheel
• Round Tube Slider

List of fitment years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

Fifth Wheel Hitch Mounting System Rail & Bracket Kit Manufactured by: Reese

Want to take the family on a cross-country adventure? Or perhaps you're planning a shorter trip to your favorite campground. Whatever your destination, it's important to have the right equipment, especially when towing a fifth wheel trailer. To ensure proper hookup and safety while towing, you'll need something to attach your fifth wheel hitch in the bed on your truck. Many pickups come equipped with factory-installed rails or puck systems, but if you don't have one of these already installed, don't worry. REESE® has an extensive line of mounting rails and bracket kits, custom-made to the exact specifications needed based on your truck's year, make, and model. REESE also offers several Industry Standard designs, as well as fastener kits, spacer kits, and a Power Puck mounting kit, so you can be sure you're covered, no matter what pickup you're using to tow. So make it easy. Make it fun. Make it REESE, so you can make the journey as enjoyable as the destination.

• For use with In-Bed REESE fifth wheel hitches
• Fits most full-size pickup trucks
• Allows full access to truck bed when fifth hitch is removed
• Ten bolt design
• Includes brackets and hardware
• Black powder coat finish

Fifth Wheel Hitch 20,000 lbs. Capacity, Dual Jaw, Legs sold separately Manufactured by: Reese

Whether you’re a novice at fifth wheel towing or you’ve been doing it for years, REESE® has the gear you need to connect your truck and trailer safely and securely. Designed with state-of-the-art equipment by top-of-the-line engineers, REESE’s 16K fifth wheel hitches are built to last! Featuring wide-stance one-piece legs, a dual jaw locking system, side-to-side pivot action to better accommodate hook-ups on uneven ground, quick installation, and strong performance while on the road. When you’re done towing, REESE’s fifth wheel hitches are easy to remove as well, giving you full access to the bed of your truck in no time. So tow with the confidence that only REESE can provide and make the journey as enjoyable as the destination.

• Rated up to 20,000 lbs. towing capacity and up to 5,000 lbs. pin weight capacity
• Fore and aft 44-degree pivot; side-to-side 5-degree pivot
• Vertically adjust from 13-1/2 inches to 17 inches
• Mounts to in-bed (industry Standard) rails
• Dual jaw locking system completely surrounds the king pin for significantly reduced wear
• Rugged appearance
• Black powder coat over E-coat finish

Fifth Wheel Round Tube Slider Unit, 20,000 lbs. Capacity Manufactured by: Reese

While it is true that you can tow with any pickup truck, you may need some extra equipment to pull a fifth wheel trailer with it. Why, you ask? Well, aside from the size and pulling capacity of each truck, pickups also come with varying bed sizes, which can make turning and maneuvering a bit of a challenge for those with a shorter bed. REESE® sliders work by moving – or sliding - your fifth wheel hitch toward the rear of your truck, so the pin position is temporarily moved behind the rear axle, to provide more room for tighter maneuvering at low speeds. Without a slider, the front – or nose – of your trailer could hit and potentially damage your truck cab when you’re trying to turn. Therefore, a slider is recommended for any short-bed pickup, so you can enjoy the journey as much as the destination.

• Rated up to 20,000 lbs. towing capacity
• For use with 16K and 20K model fifth wheel hitches
• 10 in. travel
• Contoured rollers float from side to side to accommodate mounting systems that may not be fully square
• Fully adjustable with a trailer attached
• Works with full-size and compact trucks
• Embossed roller supports for low friction and longer wear
• Forged mounting feet for wide consistent attachment to rails (PartNo: 30035 or 58058)