For 2009-2011 Volkswagen Tiguan 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Primus IQ Brake Controller By Tekonsha

This Bundle Fits The Following Vehicles:

• 2009-2011 Volkswagen Tiguan

This Bundle Includes the Following Parts:

• 7-Way RV Wiring
• Tekonsha Primus IQ Brake Control

List of fitment years: 2009, 2010, 2011

ModuLite® HD Plus Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit Manufactured by: Tekonsha

The ModuLite® HD Plus Protector is a trailer light power module that is designed to be used on most vehicles, including hard-to-wire vehicles. It draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off. It is compatible with both LED and incandescent bulbs.

• Rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
• Integrated re-settable Short Circuit and Overload protection
• Designed not to send feedback through the vehicle circuits
• Trailer brakes override hazard lamps when the brake is activated
• Advanced circuitry works in all standard applications
• Interprets/decodes multiplex signal inputs
• Can be used on a 2 wire or 3 wire system
• All solid-state components in potted encapsulation
• Includes integrated protective cover

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

The REESE Towpower wiring adapter converts your vehicle's standard 4-way flat connector to have both the versatility of a 4-way flat and the capabilities of a 7-way round connector. It offers a sealed connection that increases protection against moisture and corrosion, with a low profile design that provides a factory-installed appearance. The adapter is built with heavy-duty rugged materials and includes a 4-flat dust cover, heavy-duty spring on the 7-way connector, butt connectors for quicker wiring, and mounting hardware.

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

The Trailer Brake Controller Installation Kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary for installation.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

The 30 Amp Circuit Breaker is used in 6, 12, and 24V DC applications, such as automotive, R.V., air conditioners, battery chargers, and other applications requiring over-current protection. It features a non-corrosive molded cover that eliminates grounding when operating against a fault line, and includes a mounting bracket and installed nuts and washers.

Primus® IQ, Proportional Brake Controller for Trailers with 1-3 Axles, Grey Manufactured by: Tekonsha

The Primus® IQ is a totally proportional electric trailer brake control that is self-leveling, eliminating the need for level adjustment. It utilizes the primary sensor technology from Prodigy® and includes the Boost feature that allows users to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and a removable electrical connector for easy storage. The digital LED readout shows the secure electrical connection, amount of voltage delivery to the trailer brakes, and includes diagnostic features. The Primus® IQ is compatible with Plug-N-Play port for 2-plug adapters and has self-diagnostics features that illuminate the LED readout when issues occur. It also comes with a limited lifetime warranty.

• Utilizes Plug-N-Play port for 2-plug adapters
• Self-diagnostics features will illuminate LED readout when issues occur
• Includes a Boost feature
• Works proportionally in reverse
• Snap-in dash mounting clip and hardware included
• Digital LED readout
• Limited lifetime warranty