For 2010-2011 Lincoln MKT 7 Way Trailer Wiring RV 7 Pin 7 Blade w/ Zero Contact ZCI Module + Pro Series Pod Brake Controller + Plug & Play Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

2010-2011 Lincoln MKT

This Bundle Includes the Following Parts:

• 7-Way RV Wiring w/ Zero Contact ZCI Module

  The ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit by Tekonsha is designed for vehicles with a 12-volt system. It eliminates the need for cutting or splicing vehicle wiring and isolates trailer light operation from the tow vehicle's electrical system. With a robust design, it can be mounted either on the interior or exterior of the vehicle.

  • Works with 2 or 3 wire systems
  • Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup
  • Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
  • Works with low side switched vehicles
  • Integrated auto resetting short & overload protection

• Pro Series Pod Brake Control

  The POD® Trailer Time-Delay Brake Controller by Pro Series is perfect for trailers with 1-2 axles. Its solid-state electronics ensure reliability and accuracy. With easy mount chassis and up-front adjustment controls, installation and operation are simple. It also comes with a 5-year limited warranty for added peace of mind.

  • Power-on LED for a positive tow vehicle-to-trailer connection
  • "Up-front" manual over-ride control
  • Rugged, easy mount chassis
  • Mounting hardware included
  • Smooth and simple installation

• Plug & Play BC Adapter

  The Trailer Brake Controller Wiring Harness by Tekonsha is designed for brake controls that have a wiring port built into the back of the unit. It offers a simple plug-and-play feature for quick and easy connection. Brake controls compatible with this harness will be identified with the Plug & Play logo.

List of Fitment Years:

2010, 2011

Manufactured by: Tekonsha

ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12-volt system only.

• NO CUTTING OR SPLICING VEHICLE WIRING!
• Isolates Trailer Light Operation from Tow Vehicle's Electrical System

Manufactured by: Reese Towpower

Wiring Adapter, 4-Way Flat to 7-Way, Round Car End

The REESE Towpower pre-wired round blade 7-way connector provides versatility in going from a 4-way flat to a 7-way standard plug. It includes the electric brake, auxiliary, and backup circuits.

• Provide versatility in going from 4-Flat to 7-Way standard plug
• Pre-wired with 4-Flat and wired with butt connects and ring terminal
• Features non-corroding brass terminals
• Mounts to standard 7-Way bracket
• Non-corrosive thermo plastic construction

Manufactured by: Tekonsha

Trailer Brake Controller Installation Kit, Wire and Hardware

This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. It includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

• OEM Style wiring harness
• Easy to install
• 1-3 axles

Manufactured by: Tow Ready

Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts

This mounting bracket is designed to mount electrical connectors to the attachment bracket. It includes screws and nuts for convenient installation. It comes in attractive point-of-purchase packaging.

Manufactured by: Pro Series

POD® Trailer Time-Delay Brake Controller for Trailers with 1-2 Axles

POD (Power on Demand) is your best choice for 1 or 2 axle trailers, especially when your installation options are limited. It can be mounted in any direction and features "up-front-easy-access" adjustment controls, even when mounted upside down. With solid state electronics and a power-on LED, you can expect reliable and accurate towing.

• Mounting hardware included
• Smooth and simple installation
• Plug & Play feature allows quick and easy connection
• 5-year limited warranty

Manufactured by: Tekonsha

Trailer Brake Controller Wiring Harness

Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.