For 2011-2016 Nissan Quest 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha BRAKE-EVN Brake Controller + Wiring Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

2011-2016 Nissan Quest

This Bundle Includes the Following Parts:

• T-One® T-Connector Harness, 4-Way Flat, w/Circuit Protected ModuLite® HD Module

  Manufactured by: Tekonsha

  Connections are important, be it with your traveling companions or the truck and trailer in which you’re riding. Thankfully, Tekonsha® has everything you need for the perfect connection, no matter your set up. For more than 55 years, Tekonsha has been the leader in T-One Connectors, utilizing advanced engineering and development to design products that allow you the freedom to travel with nearly any vehicle and trailer combination. Tekonsha’s dedication to creating the highest performing trailering electrical components with the broadest coverage ensures your connections are safe and secure. So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide. Life is a Journey. Stop Often.

  • 16 Gauge Bonded Wire With 4-Way Flat Plug & Play
  • Stop/Turn Circuit Capacity Of 4.2 Amps
  • Taillight Circuit Capacity Of 7.5 Amps
  • Solid, Weatherproof, One-Piece Construction
  • No Cutting, Splicing, Or Taping Of Vehicle Wires
  • Includes Converter Where Needed

• Wiring Adapter, 7-Way Flat to 4-Way Flat

  Manufactured by: Reese Towpower

  REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector.

  • Provide versatility in going from 4 way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory installed appearance
  • Built with heavy duty rugged materials
  • Included 4-Flat dust cover and heavy duty spring on 7-Way connector
  • Butt connectors pre attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  Manufactured by: Tow Ready

  Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.

• BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black

  Manufactured by: Tekonsha

  The Tekonsha BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicles deceleration rate. Proportional braking gets you get smoother stops that traditional time based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. When adjusted properly for your load, proportional brake controls can even extend the life of your vehicles brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to brake 4 axles and offers a simple plug in installation option, so be sure to get the proper factory harness for your vehicle. The perfect choice for light or heavy trailer loads.

  • 1-4 Axle capacity
  • Boost feature gives ability to apply more initial trailer braking
  • Reverse battery protection
  • No leveling required
  • Diagnostics features incorporated in easy to read LED display
  • Plug & Play feature allows for quick and easy connections
  • Small compact design designed for todays dashes
  • Simple push button adjustments

• Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length

  Manufactured by: Tekonsha

  This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging.

  • OEM style wiring harness
  • Quick and easy plug in connections
  • Allows controller to be unplug and moved to other vehicles
  • Color coded wire match brake control standards
  • Works on time proportional and time based controls
  • Positive locking connector stays connected when plug in tightly
  • Simple do it yourself instructions on every package
  • Fits REESE Towpower and Tekonsha brake controllers