For 2011-2012 RAM 3500 Tekonsha Prodigy iD Bluetooth Wireless Trailer Brake Controllerler + Plug & Play Adapter + 7 Way Trailer Wiring RV 7 Pin 7 Blade By Tekonsha

This Bundle Fits The Following Vehicles:

2011-2012 RAM 3500

This Bundle Includes the Following Parts:

1. Tekonsha Prodigy iD Bluetooth Wireless Brake Control

   This brake control seamlessly integrates into your vehicle for a clean in-dash appearance. With fingertip control using the rotary knob, you can easily adjust brake control settings. The color LED display provides easy-to-read diagnostics and alerts. For complete control, download the Tekonsha EDGE mobile app to set power and boost, store multiple trailer and driver settings, and more.

2. Plug & Play BC Adapter

   This adapter is designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

3. 7-Way RV Wiring

   This wiring harness provides a versatile connection from your vehicle to your trailer. It features heavy-duty construction and includes a mounting bracket and hardware.

ModuLite® HD Plus Protector w/ Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit Manufactured by: Tekonsha

• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit

• Universal ModuLite designed to be used on most vehicles plus the hard to wire vehicles

• Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off

• Will work with either LED/Incandescent bulbs (vehicle & trailer)

• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps

• Designed not to send feedback through the vehicle circuits

• The trailer brakes will override the hazard lamps when the brake is activated

• Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems

• Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes, and VW)

• Will not work with vehicles with low-side switch

• Can be used on a 2 wire or 3 wire system

• All solid-state components in potted encapsulation

• Includes integrated protective cover

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

• Provide versatility in going from 4-way flat to 7-Way round blade

• Sealed connection increases protection against moisture & corrosion

• Low profile design provides a factory installed appearance

• Built with heavy-duty rugged materials

• Included 4-Flat dust cover and heavy-duty spring on 7-Way connector

• Butt connectors pre-attached for quicker wiring

• Mounting bracket included

• Mounting hardware included

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

This installation kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

This circuit breaker is used in various applications such as automotive, R.V., air conditioners, and battery chargers. It provides over-current protection and its non-corrosive molded cover eliminates grounding when operating against a fault line. The circuit breaker comes with a mounting bracket and installed nuts and washers.

Prodigy® iD Smart Phone Configured Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

• The Prodigy iD brake controller seamlessly integrates into your vehicle for a clean in-dash appearance

• Fingertip control allows you to easily adjust brake control settings

• Color LED display provides easy-to-read diagnostics and alerts

• Tekonsha EDGE mobile app puts complete control in your hands

• Store multiple trailers and drivers

• Manual override using the rotary control knob

• Switch between Proportional and Timed braking depending on your towing need

Trailer Brake Controller Wiring Harness Manufactured by: Tekonsha

Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.