For 2013-2019 Lexus RX350 7 Pin Trailer Wiring RV 7 Way Trailer Plug (For Prepped w/Factory Tow Plug Models) By Tekonsha

This Bundle Fits The Following Vehicles:

2013-2019 Lexus RX350 Prepped w/Factory Tow Plug

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  List of fitment years: 2013, 2014, 2015, 2016, 2017, 2018, 2019

• Tow Harness, 4-Way Flat, w/Circuit Protected ModuLite® Module

  Manufactured by: Tekonsha

  T-One Connectors require no splicing of vehicle wires. Simply locate your vehicle's wiring harness connector, unplug the connection, and insert the T-One Connector into the vehicle's harness. No special tools required.

  • Exact replacement for damaged factory wiring harnesses
  • Installs in seconds on vehicles not factory pre-wired
  • Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
  • Connects directly to standard factory connector
  • Attractive point-of-purchase packaging
  • Stop/Turn circuit capacity of 2.1 Amps
  • Taillight circuit capacity of 5.6 Amps

• Wiring Adapter, 7-Way Flat to 4-Way Flat

  Manufactured by: Reese Towpower

  REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two-port connector, offering both the 4-way flat, 7-way round connector.

  • Provide versatility in going from 4-way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory-installed appearance
  • Built with heavy-duty rugged materials
  • Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
  • Butt connectors pre-attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  Manufactured by: Tow Ready

  Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  Used in 6, 12, and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.