For 2013-2017 Chevrolet Traverse 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Brakeman IV Brake Controller + Plug & Play Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

• 2013-2017 Chevrolet Traverse

This Bundle Includes the Following Parts:

1. 7-Way RV Wiring
2. Tekonsha Brakeman IV Brake Control
3. Plug & Play BC Adapter

List of Fitment Years:

2013, 2014, 2015, 2016, 2017

Tow Harness, 7-Way Manufactured by: Tekonsha

T-One Connectors require no splicing of vehicle wires. Simply locate your vehicle's wiring harness connector, unplug the connection, and insert the T-One Connector into the vehicle's harness. No special tools required.

• - Exact replacement for damaged factory wiring harnesses
• - Installs in seconds on vehicles not factory pre-wired
• - Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
• - Connects directly to standard factory connector
• - Attractive point-of-purchase packaging

Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts Manufactured by: Tow Ready

• - Mounts electrical connector to attachment bracket
• - Includes screws and nuts
• - Attractive point-of-purchase packaging

Brakeman® IV Time-Delay Brake Controller for Trailers with 1-4 Axles, Black Manufactured by: Tekonsha

The Tekonsha Brakeman IV digital brake control is designed to handle from one to four braking axles and includes a digital display. The digital display indicates the amount of voltage power being delivered to the brakes and assists in accurately adjusting the trailer brakes for city or highway driving. Separate adjustment controls (Output & Sync) allow for not only the different weights (Output) of trailers but also the speed of activation (Sync) depending on your driving style.

• - Small compact design
• - Easy push button adjustment for output and sync
• - Plug and play feature allows quick and easy connection
• - Digital display output setting, sync setting, brake overload or short connection
• - Advanced internal circuit protection
• - No leveling required
• - Mounts in any direction
• - For use on 12 volt negative ground systems only

Trailer Brake Controller Wiring Harness Manufactured by: Tekonsha

Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.