For 2013-2014 BMW X1 7 Way Trailer Wiring RV 7 Pin 7 Blade w/ Zero Contact ZCI Module + Pro Series Pilot Brake Controller + Wiring Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

2013-2014 BMW X1

This Bundle Includes the Following Parts:

• 7-Way RV Wiring w/ Zero Contact ZCI Module

  Manufactured by: Tekonsha

  This ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit provides sensor technology and direct connection to the tow vehicle battery, eliminating all electrical connection and interference with the tow vehicle electrical system. It is compatible with vehicles with a 12-volt system only.

  • NO CUTTING OR SPLICING VEHICLE WIRING!
  • Isolates Trailer Light Operation from Tow Vehicle's Electrical System
  • Works with 2 or 3 wire systems
  • Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup
  • Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
  • Works with low side switched vehicles
  • Integrated auto resetting short & overload protection
  • Robust design allows for interior or exterior mounting

• Generic BC Wiring Adapter

  Manufactured by: Reese Towpower

  This Wiring Adapter, 4-Way Flat to 7-Way, Round Car End is designed for versatility, allowing you to go from a 4-way flat to a 7-way standard plug. The adapter includes electric brake, auxiliary, and backup circuits.

  • Provide versatility in going from 4-Flat to 7-Way standard plug
  • Pre-wired with 4-Flat and wired with butt connects and ring terminal
  • Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal
  • Features non-corroding brass terminals
  • Mounts to standard 7-Way bracket
  • Non-corrosive thermo plastic construction
  • Ring terminal already mounted to ground wire
  • 12 volt and brake wires have butt connectors already attached

• Trailer Brake Controller Installation Kit, Wire and Hardware

  Manufactured by: Tekonsha

  This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. The kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

  • OEM Style wiring harness
  • Easy to install
  • 1-3 axles

• Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts

  Manufactured by: Tow Ready

  This Mounting Bracket is designed to mount the electrical connector to an attachment bracket. It includes screws and nuts, ensuring an easy installation. The bracket comes in attractive point-of-purchase packaging.

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts
  • Attractive point-of-purchase packaging

• Pilot® Trailer Time-Delay Brake Controller for Trailers with 1-3 Axles

  Manufactured by: Pro Series

  The Pilot Trailer Time-Delay Brake Controller features a dark smoke lens that is ideal for direct light applications, providing optimum visibility to read the large, two-digit display. The controller has flexible mounting options and can be installed in any direction. The digital display shows voltage output to the brakes.

  • Large easy to read dual digital display shows:
  • Properly wired control
  • Voltage output to brakes (vs. a percentage)
  • Connection to trailer
  • Dark smoke lens ideal for direct light applications; performs better than red lens
  • Protection against short circuit/loss of ground
  • Microprocessor allows control to be mounted upside down and still have a readable display
  • Standard mounting bracket included with optional ball mount available
  • For use on any 12 volt negative ground system
  • Plug & Play feature allows quick and easy connection
  • Limited lifetime warranty

• Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length

  Manufactured by: Tekonsha

  This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug into the controller to complete installation. This harness makes it easy to move the brake controller from one vehicle to another by just unplugging.

  • OEM style wiring harness
  • Quick and easy plug-in connections
  • Allows controller to be unplugged and moved to other vehicles
  • Color-coded wire matches brake control standards
  • Works on time proportional and time-based controls
  • Positive locking connector stays connected when plugged in tightly
  • Simple do-it-yourself instructions on every package
  • Fits REESE Towpower and Tekonsha brake controllers