This Bundle Fits The Following Vehicles:

2014-2020 Acura MDX

This Bundle Includes the Following Parts:

• 7-Way RV Wiring - Manufactured by: Tekonsha

  T-One Connectors require no splicing of vehicle wires. Simply locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. No special tools required.

  • Exact replacement for damaged factory wiring harnesses
  • Installs in seconds on vehicles not factory pre-wired
  • Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
  • Connects directly to standard factory connector
  • Attractive point-of-purchase packaging
  • Stop/Turn circuit capacity of 4.2 Amps
  • Taillight circuit capacity of 12 Amps

• Mounting Bracket, 7-Way OEM Connectors - Manufactured by: Tow Ready

  This mounting bracket is used to mount the electrical connector to the attachment bracket. It includes screws and nuts for easy installation.

  • Mounts electrical connector to attachment bracket
  • Includes screws and nuts
  • Attractive point-of-purchase packaging

• Pilot® Trailer Time-Delay Brake Controller for Trailers with 1-3 Axles - Manufactured by: Pro Series

  The Pilot brake controller has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. It has flexible mounting options and can be installed in any direction. The Pilot's digital display shows voltage output to the brakes.

  • Large easy to read dual digital display shows:
  • Properly wired control
  • Voltage output to brakes (vs. a percentage)
  • Connection to trailer
  • Dark smoke lens ideal for direct light applications; performs better than red lens
  • Protection against short circuit/loss of ground
  • Microprocessor allows control to be mounted upside down and still have a readable display
  • Standard mounting bracket included with optional ball mount available
  • For use on any 12 volt negative ground system
  • Plug & Play feature allows quick and easy connection
  • Limited lifetime warranty

• Trailer Brake Controller Wiring Harness - Manufactured by: Tekonsha

  Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years:

2014, 2015, 2016, 2017, 2018, 2019, 2020