For 2016-2022 Nissan NP300 Navara 7 Pin Trailer Wiring RV 7 Way Trailer Plug (For International Only Models) By Tekonsha

This Bundle Fits The Following Vehicles:

2016-2022 Nissan NP300 Navara International Only

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  List of fitment years: 2016, 2017, 2018, 2019, 2020, 2021, 2022

• ModuLite® HD Plus Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit

  Manufactured by: Tekonsha

  • The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
  • Universal ModuLite designed to be used on most vehicles plus the hard to wire vehicles
  • Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off
  • Will work with either LED/Incandescent bulbs (vehicle & trailer)
  • Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • Designed not to send feedback thru the vehicle circuits
  • The trailer brakes will override the hazard lamps when the brake is activated
  • Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems
  • Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes and VW)
  • Will not work with vehicles with low-side switch
  • Can be used on a 2 wire or 3 wire system
  • All solid-state components in potted encapsulation
  • Includes integrated protective cover
• Wiring Adapter, 7-Way Flat to 4-Way Flat

  Manufactured by: Reese Towpower

  • REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector
  • The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector
  • Provide versatility in going from 4 way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory installed appearance
  • Built with heavy duty rugged materials
  • Included 4-Flat dust cover and heavy duty spring on 7-Way connector
  • Butt connectors pre attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included
• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  Manufactured by: Tow Ready

  Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.