For 2017-2020 Chrysler Pacifica 7 Pin Trailer Wiring RV 7 Way Trailer Plug By Tekonsha

This Bundle Fits The Following Vehicles:

2017-2020 Chrysler Pacifica

This Bundle Includes the Following Parts:

1. 7-Way RV Wiring

List of fitment years: 2017, 2018, 2019, 2020

ModuLite® HD Plus Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit Manufactured by: Tekonsha

• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit

• Universal ModuLite designed to be used on most vehicles plus the hard to wire vehicles

• Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off

• Will work with either LED/Incandescent bulbs (vehicle & trailer)

• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps

• Designed not to send feedback thru the vehicle circuits

• The trailer brakes will override the hazard lamps when the brake is activated

• Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems

• Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes and VW)

• Will not work with vehicles with low-side switch

• Can be used on a 2 wire or 3 wire system

• All solid-state components in potted encapsulation

• Includes integrated protective cover

Wiring Adapter, 7-Way Flat to 4-Way Flat Manufactured by: Reese Towpower

• REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector.

• Provide versatility in going from 4 way flat to 7-Way round blade

• Sealed connection increases protection against moisture & corrosion

• Low profile design provides factory installed appearance

• Built with heavy duty rugged materials

• Included 4-Flat dust cover and heavy duty spring on 7-Way connector

• Butt connectors pre attached for quicker wiring

• Mounting bracket included

• Mounting hardware included

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.