For 2017-2020 Chrysler Pacifica 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha BRAKE-EVN Brake Controller + Plug & Play Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

2017-2020 Chrysler Pacifica

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Manufactured by: Tekonsha

• Tekonsha BRAKE-EVN Brake Control

  Manufactured by: Tekonsha

• Plug & Play BC Adapter

  Manufactured by: Tekonsha

List of Fitment Years:

2017, 2018, 2019, 2020

ModuLite® HD Plus Protector w/Integrated Circuit & Overload Protection

The ModuLite® HD Plus Protector is a trailer light power module and installation kit manufactured by Tekonsha. It is designed to be used on most vehicles, including hard-to-wire vehicles. The unit draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off. It is compatible with both LED and incandescent bulbs and has integrated re-settable short circuit and overload protection. The unit is designed not to send feedback through the vehicle circuits and works in all standard applications as well as vehicles with pulse width modulation systems. Please note that it will not work with vehicles with a low-side switch. The ModuLite® HD Plus Protector includes all solid-state components in potted encapsulation and comes with an integrated protective cover.

Wiring Adapter, 7-Way Flat to 4-Way Flat

The Wiring Adapter, manufactured by Reese Towpower, is a dual port adapter that offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat and the capabilities of a 7-way round connector. The sealed connection increases protection against moisture and corrosion, and the low profile design provides a factory-installed appearance. The adapter is built with heavy-duty rugged materials and comes with a 4-flat dust cover and heavy-duty spring on the 7-way connector. The butt connectors are pre-attached for quicker wiring, and the mounting bracket and hardware are included.

Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

The Trailer Brake Controller Installation Kit, manufactured by Tow Ready, includes all the necessary parts required to completely install all brake controls. No other parts are necessary.

Circuit Breaker, 30 Amp

The Circuit Breaker, manufactured by Tekonsha, is used in 6, 12, and 24V DC applications. It is suitable for automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. The non-corrosive molded cover eliminates grounding when operating against a fault line. The breaker includes a mounting bracket and installed nuts and washers.

BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black

The Tekonsha BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicle's deceleration rate. Proportional braking provides smoother stops than traditional time-based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. Properly adjusted for your load, the proportional brake control can even extend the life of your vehicle's brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to 4 axles and offers a simple plug-and-play installation option. Please make sure to get the proper factory harness for your vehicle. The BRAKE-EVN brake controller is suitable for light or heavy trailer loads.

Trailer Brake Controller Wiring Harness

Towing and trailering requires a lot of equipment, and sometimes that equipment requires adapters to make it fit just right. Thankfully, Tekonsha has a complete line of adapters, or harnesses, to fit whatever brake controller you may choose. These Plug & Play adapters are designed with a plug-in installation on both ends, making it simple to install a brake controller into a factory under-dash connector. Many vehicles today are pre-wired with a brake controller connector under the dash, and selecting a Tekonsha Plug & Play adapter makes wiring easy and trouble-free. There's no cutting or splicing needed! Just select the custom two-plug adapter to fit your vehicle, then plug the Tekonsha Plug & Play adapter into your vehicle's under-dash connector and the other end into your brake controller. In no time, you'll be on the road. Life's a Journey. Stop Often.