For 2017-2019 Infiniti QX30 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller (Excludes: Sport Models) By Tekonsha

This Bundle Fits The Following Vehicles:

2017-2019 Infiniti QX30 Except Sport

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Manufactured by: Reese Towpower

  The Reese Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two-port connector, offering both the 4-way flat, 7-way round connector.

  Features:

  • Provides versatility in going from 4-way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory installed appearance
  • Built with heavy-duty rugged materials
  • Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
  • Butt connectors pre-attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Tekonsha Prodigy P2 Brake Control

  Manufactured by: Tekonsha

  The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle - even in reverse gear. If you have to slam on your truck's brakes, the trailer's brakes respond instantly, too - there's no delay. Therefore your vehicle's brakes aren't overworked from trying to stop the entire load, and they suffer less wear and tear extending the longevity of your brakes compared to time-based controls.

  The P2 also cuts power to the trailer's brakes when your vehicle is stopped - extending the life of the magnets and brake shoes in the trailer's brake assemblies. Aside from smoother, more efficient braking that results from proportional application of stopping power, the Prodigy P2 also has a boost feature that gives you more initial braking power for those times when you're towing heavier loads. That's when more braking power is needed to stop the trailer at the same time as the tow vehicle.

  Features:

  • Reverse battery protection for both vehicle and breakaway
  • Designed to work with electric over hydraulic brake systems
  • Numerous mounting options - including 360-degree vertical rotation
  • Digital display depicts voltage delivery to the trailer during braking
  • No level adjustment necessary - it adjusts itself to varying terrain as you drive
  • Works proportionally in reverse with the ability to disable when not needed
  • Produces stops that are in proportion to the vehicle's deceleration rate
  • "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers
  • Continual diagnostics check for proper connection, shorted magnet conditions, and much more
  • Quick and easy disconnect feature allows the user to remove and store the control when not in use
  • Electric trailer brake control for up to 4 braking axles
  • Limited lifetime warranty

• ModuLite® HD Plus Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit

  Manufactured by: Tekonsha

  The Tekonsha ModuLite HD Plus Protector is a universal ModuLite designed to be used on most vehicles, including hard-to-wire vehicles. It draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off. The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit.

  Features:

  • Will work with either LED/Incandescent bulbs (vehicle & trailer)
  • Has integrated resettable Short Circuit and Overload protection to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • Designed not to send feedback through the vehicle circuits
  • The trailer brakes will override the hazard lamps when the brake is activated
  • Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems
  • Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes, and VW)
  • Will not work with vehicles with low-side switch
  • Can be used on a 2-wire or 3-wire system
  • All solid-state components in potted encapsulation
  • Includes integrated protective cover

  Wiring Adapter, 7-Way Flat to 4-Way Flat

  Manufactured by: Reese Towpower

  The Reese Towpower wiring adapter is used to convert a 7-way flat connector to a 4-way flat connector. It provides a sealed connection that increases protection against moisture & corrosion. The low-profile design provides a factory-installed appearance and it is built with heavy-duty rugged materials.

  Features:

  • Includes 4-Flat dust cover and heavy-duty spring on 7-Way connector
  • Butt connectors pre-attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only

  Manufactured by: Tow Ready

  The Tow Ready installation kit includes all the necessary parts required to completely install all brake controls. No other parts are necessary.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  The Tekonsha circuit breaker is used in 6, 12, and 24V DC applications. It can be used in automotive, R.V., air conditioners, battery chargers, and any application requiring over-current protection. The non-corrosive molded cover eliminates grounding when operating against a fault line. It includes a mounting bracket and installed nuts and washers.