For 2018-2021 Lexus RX350L 7 Way Trailer Wiring RV 7 Pin 7 Blade + Pro Series Pilot Brake Controller + Wiring Adapter (For Prepped w/Factory Tow Plug Models) By Tekonsha

This Bundle Fits The Following Vehicles:

2018-2021 Lexus RX350L Prepped w/Factory Tow Plug

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Tow Harness, 4-Way Flat, w/Circuit Protected ModuLite® Module Manufactured by: Tekonsha

  This Tekonsha tow harness is an exact replacement for damaged factory wiring harnesses. It can be installed in seconds on vehicles that are not factory pre-wired and upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors. The harness connects directly to the standard factory connector and has a capacity of 2.1 Amps for stop/turn circuits and 5.6 Amps for taillight circuits.

• Pro Series Pilot Brake Control

  Pilot® Trailer Time-Delay Brake Controller for Trailers with 1-3 Axles Manufactured by: Pro Series

  The Pro Series Pilot Brake Control features a large, easy-to-read dual digital display that shows the properly wired control, voltage output to brakes (instead of a percentage), and connection to the trailer. It has a dark smoke lens ideal for direct light applications, performs better than a red lens, and offers protection against short circuit/loss of ground. The microprocessor allows the control to be mounted upside down and still have a readable display. The control comes with a standard mounting bracket and a limited lifetime warranty.

• Generic BC Wiring Adapter

  Wiring Adapter, 4-Way Flat to 7-Way, Round Car End Manufactured by: Reese Towpower

  The Reese Towpower wiring adapter is pre-wired with a 4-Flat and wired with butt connects and a ring terminal. It provides versatility in going from a 4-Flat to a 7-Way standard plug and features non-corroding brass terminals. The adapter mounts to a standard 7-Way bracket and has non-corrosive thermo plastic construction. The ring terminal is already mounted to the ground wire, and the adapter comes with 12 volt and brake wires that have butt connectors already attached.

• Trailer Brake Controller Installation Kit

  Trailer Brake Controller Installation Kit, Wire and Hardware Manufactured by: Tekonsha

  This Tekonsha brake control installation kit contains all the wires and hardware needed to install a brake control in any vehicle that is not pre-wired for a brake controller. The kit includes all wires going to both the battery and the connector located at the rear of the vehicle. The OEM-style wiring harness makes installation easy, and the kit is compatible with 1-3 axles.

• Mounting Bracket, 7-Way OEM Connectors

  Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts Manufactured by: Tow Ready

  The Tow Ready mounting bracket is designed to mount electrical connectors to the attachment bracket and includes screws and nuts. It comes in attractive point-of-purchase packaging.

• Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length

  Trailer Brake Controller Installation Kit, Universal Fit, 12 in. Length Manufactured by: Tekonsha

  This universal harness is designed to mate with any Tekonsha brake controller. Simply wire in the harness and then plug it into the controller to complete the installation. The harness allows the controller to be unplugged and moved to other vehicles, and it has color-coded wires that match brake control standards. It works with both time proportional and time-based controls and has a positive locking connector for secure connection. The package includes simple do-it-yourself instructions and is compatible with REESE Towpower and Tekonsha brake controllers.

List of Fitment Years:

• 2018
• 2019
• 2020
• 2021