For 2018-2019 Lexus RX350L Trailer Hitch Tow PKG w/ 4-Flat Wiring + Dual Adjustable Drop Rise Ball Ball Mount 2" & 2-5/16" Trailer Balls + Pin/Clip (For Prepped w/Factory Tow Plug (See Instructions Prior to Installation) Models) By Reese

This Bundle Fits The Following Vehicles:
2018-2019 Lexus, RX350L, Prepped w/Factory Tow Plug (See Instructions Prior to Installation)

This Bundle Includes the Following Parts:
Trailer Hitch
4-Flat Wiring
Dual Adjustable Drop Rise Ball Ball Mount 2 inch & 2-5/16 inch Trailer Balls
Pin/Clip

List of fitment years: 2018, 2019

The hitch is visible behind your bumper, and does not require drilling

Class 4 Trailer Hitch, 2-Inch Receiver, Black Manufactured by: Reese Towpower
REESE Class IV trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. REESE’s expert engineers and designers create each custom hitch with the utmost precision to ensure a superior fit for your specific make and model year vehicle. The legacy brand’s Class IV receiver hitches are rated for up to 6,000 lbs. gross trailer weight (GTW) and up to 900 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 8,000 lbs. weight distribution (WD) and 900 lbs. weight distribution tongue weight (WDTW). REESE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. Every REESE trailer hitch is inspected to ensure the highest quality and workmanship and is tested to exceed V-5 and SAE J684 standards. These durable custom hitches are manufactured for Toyota Highlander, Lexus RX350L and attach to your vehicle’s frame or bumper for a sleek, clean appearance. Each hitch also has a two-inch square receiver tube opening – the most common and versatile on the market - allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, RV, boat trailer, or utility trailer. The options are endless! REESE Class IV custom trailer hitches come complete with all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. So, whether you are headed out to the campground, the lake, or the bike trails, or you’re hauling cargo to and from the job site, choose REESE and travel with confidence knowing your setup is connected with the security only REESE can provide. REESE: Helping you enjoy the journey as much as the destination.
• CUSTOM DESIGNS: REESE Class IV trailer hitches are custom built according to manufacturer specifications for make and model year to ensure a perfect fit and top towing performance. The sleek computer-aided designs are as attractive as they are functional 
• STRENGTH: Made of solid, all-welded steel for maximum strength and safety, each hitch is put through rigorous fatigue and stress testing to withstand road abuse (within specified capacities). Each is also protected by a two-part black powder coat finish to resist rust and corrosion 
• TESTED: REESE hitches are inspected for quality and workmanship and are tested to meet and exceed V-5 and SAE J684 standards 
• CAPACITY: Rated for up to 6,000 lbs. GTW and up to 900 lbs. TW. Also suitable for use with Weight Distribution systems of up to 8,000 lbs. WD and 900 lbs. WDTW. The two-inch receiver can connect to a ball mount, bike rack, cargo carrier, and more!
• VERSATILE: This REESE Class IV hitch is designed to fit the following make and model year vehicle(s): Toyota Highlander, Lexus RX350L
• EXCLUSIONS: This REESE Class III hitch does NOT fit the following: Except with Twin-Tip Exhaust

Tow Harness, 4-Way Flat Manufactured by: Tekonsha
T-One Connectors require no splicing of vehicle wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle’s harness. No special tools required.
• Exact replacement for damaged factory wiring harnesses
• Installs in seconds on vehicles not factory pre-wired
• Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
• Connects directly to standard factory connector
• Attractive point-of-purchase packaging
• Stop/Turn circuit capacity of 7.5 Amps

Adjustable Trailer Hitch Ball Mount (2 in., 2-5/16 in. Trailer Balls), Fits, 2 in. Receiver, 10.5 in. Drop, 14,000 lbs. Capacity Black Manufactured by: Draw-Tite
When a traditional ball mount just won’t do, turn to a Draw-Tite® specialty ball mount. Draw-Tite’s extensive line of specialty ball mounts are made to handle the tough towing jobs, with offerings ranging from high-capacity tri-ball mounts, to tow hooks, recovery rings, and everything in between. This group of ball mounts allow you to tackle heavier, bulkier, unique towing needs with shanks that still fit a 2-inch receiver tube, so you can use the hitch you already have. Draw-Tite specialty ball mounts come in a variety of styles and weight capacities so you can be sure to find the one that’s right for your job. With so many options and easy-to-understand instructions, it’s no wonder Draw-Tite has been a leader in the towing industry for more than 75 years! 
• Fits 2 in. Receiver Tube Opening
• 14,000 lbs. Capacity
• Height Adjusts up to 10.5 in.
• Hitch Ball Capacity: 2 in. = 10,000 lbs., 2-5/16 in. = 14,000 lbs.
• Black Powder Coat Finish

Trailer Hitch Pin & Clip, Fits 2 in. Receiver, 5/8 in. Pin Diameter Manufactured by: Reese Towpower
REESE Towpower 5/8 In. pin and clip is designed to fit Class III / IV, Reese 33, 36, 36, 37, 44, and 51 series hitches with 2 In. hitch boxes. This pin is 5/8 inch in diameter and includes the spring cotter pin. The PVC comfort grip is designed to protect the hands and allow for a better grip while inserting or removing the pin and clip.
• Black comfort grip on both pin and clip
• 5/8 In. diameter pin and clip set
• Easier to pick up
• Always keep extra pin and clips on hand for safe towing
• Class III and IV
• 1 year limited warranty