For 2019-2024 Ford F-350 Super Duty 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P2 Brake Controller + Plug & Play Adapter By Reese Towpower

This Bundle Fits The Following Vehicles:

2019-2024 Ford F-350 Super Duty

This Bundle Includes the Following Parts:

• 7-Way RV Wiring

  Manufactured by: Reese Towpower

  The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end, and includes 48 In. of wire with splice connectors. The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems.

  • Molded 4-Flat vehicle connector
  • Features 18 gauge bonded wire
  • Ground wire runs full length of assembly
  • Tin plated terminals
  • Bolded wire for a clean neat appearance.
  • Rated for 7.5 amps per circuit
  • Conforms to SAE spec. J1128 standard

• Tekonsha Prodigy P2 Brake Control

  Manufactured by: Tekonsha

  The Prodigy P2 electric brake controller supplies power to your tow vehicle's brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle - even in reverse gear. If you have to slam on your truck's brakes, the trailer's brakes respond instantly, too - there's no delay.

  • Reverse battery protection for both vehicle and breakaway
  • Designed to work with electric over hydraulic brake systems
  • Numerous mounting options - including 360 degree vertical rotation
  • Digital display depicts voltage delivery to trailer during braking
  • No level adjustment necessary - it adjusts itself to varying terrain as you drive
  • Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed
  • Produces stops that are in proportion to vehicles deceleration rate
  • Boost feature gives users the ability to apply more initial trailer braking power when towing heavier trailers
  • Continual diagnostics check for proper connection, shorted magnet conditions and much more
  • Quick and easy disconnect feature allows user to remove and store the control when not in use
  • Electric trailer brake control for up to 4 braking axles
  • Limited lifetime warranty

• Plug & Play BC Adapter

  Manufactured by: Reese Towpower

  REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector. The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector.

  • Provide versatility in going from 4 way flat to 7-Way round blade
  • Sealed connection increases protection against moisture & corrosion
  • Low profile design provides factory installed appearance
  • Built with heavy duty rugged materials
  • Included 4-Flat dust cover and heavy duty spring on 7-Way connector
  • Butt connectors pre attached for quicker wiring
  • Mounting bracket included
  • Mounting hardware included

• Trailer Brake Controller Installation Kit

  Manufactured by: Tow Ready

  Includes all necessary parts required to completely install all brake controls. No other parts are necessary.

• Circuit Breaker, 30 Amp

  Manufactured by: Tekonsha

  Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.

• Trailer Brake Controller Wiring Harness

  Manufactured by: Tekonsha

  Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.

List of fitment years: 2019, 2020, 2021, 2022, 2023, 2024