For 2021-2024 Chrysler Pacifica 7 Way Trailer Wiring RV 7 Pin 7 Blade + Pro Series POD Brake Controller + Plug & Play Adapter By Tekonsha

This Bundle Fits The Following Vehicles:

2021-2024 Chrysler Pacifica

This Bundle Includes the Following Parts:

_x000D_
• 7-Way RV Wiring
_x000D_
• Pro Series POD Brake Control
_x000D_
• Plug & Play BC Adapter
_x000D_

List of fitment years: 2021, 2022, 2023, 2024

T-One® T-Connector Harness, 4-Way Flat, w/Circuit Protected ModuLite® HD Module

Manufactured by: Tekonsha

Connections are important, be it with your traveling companions or the truck and trailer in which you’re riding. Thankfully, Tekonsha® has everything you need for the perfect connection, no matter your set up. For more than 55 years, Tekonsha has been the leader in T-One Connectors, utilizing advanced engineering and development to design products that allow you the freedom to travel with nearly any vehicle and trailer combination. Tekonsha’s dedication to creating the highest performing trailering electrical components with the broadest coverage ensures your connections are safe and secure. So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide. Life is a Journey. Stop Often.

_x000D_
• 16 Gauge Bonded Wire With 4-Way Flat Plug & Play
_x000D_
• Stop/Turn Circuit Capacity Of 5 Amps
_x000D_
• Taillight Circuit Capacity Of 7.5 Amps
_x000D_
• Solid, Weatherproof, One-Piece Construction
_x000D_
• No Cutting, Splicing, Or Taping Of Vehicle Wires
_x000D_
• Includes Converter Where Needed
_x000D_

Wiring Adapter, 4-Way Flat to 7-Way, Round Car End

Manufactured by: Reese Towpower

The REESE Towpower pre-wired round blade 7-way connector provides versatility in going from a 4-way flat to a 7-way standard plug. The 7-way connectors include electric brake, auxiliary, and backup circuits.

_x000D_
• Provide versatility in going from 4-Flat to 7-Way standard plug
_x000D_
• Pre-wired with 4-Flat and wired with butt connects and ring terminal
_x000D_
• Easy wiring featuring prewired with 4-Flat and wired with butt connects and ring terminal
_x000D_
• Features non-corroding brass terminals
_x000D_
• Mounts to standard 7-Way bracket
_x000D_
• Non-corrosive thermo plastic construction
_x000D_
• Ring terminal already mounted to ground wire
_x000D_
• 12 volt and brake wires have butt connectors already attached
_x000D_

Trailer Brake Controller Installation Kit, Wire and Hardware

Manufactured by: Tekonsha

This complete Tekonsha brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle.

_x000D_
• OEM Style wiring harness
_x000D_
• Easy to install
_x000D_
• 1-3 axles
_x000D_

Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts

Manufactured by: Tow Ready

_x000D_
• Mounts electrical connector to attachment bracket
_x000D_
• Includes screws and nuts
_x000D_
• Attractive point-of-purchase packaging
_x000D_

POD® Trailer Time-Delay Brake Controller for Trailers with 1-2 Axles

Manufactured by: Pro Series

POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction and features “up-front-easy-access” adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mounting surfaces.

_x000D_
• Solid state electronics
_x000D_
• Power-on LED for a positive tow vehicle-to-trailer connection
_x000D_
• “Up- front” manual over-ride control
_x000D_
• Rugged, easy mount chassis
_x000D_
• Mounting hardware included
_x000D_
• Smooth and simple installation
_x000D_
• Plug & Play feature allows quick and easy connection
_x000D_
• 5 year limited warranty
_x000D_

Trailer Brake Controller Wiring Harness

Manufactured by: Tekonsha

_x000D_
• Provides Plug and Play connector to mate with all HZN brake controllers
_x000D_
• Features a factory connector on one end and a brake control connector on the other
_x000D_
• Eliminates the need for cutting or splicing of wires
_x000D_
• Positive locking connector stays connected when plug in tightly
_x000D_
• Reduces possible short circuits
_x000D_