MODULITE® POWER MODULES

TRAILER LIGHT POWER MODULES

• Virtually eliminates additional electrical draw  on the vehicle’s taillight circuits
• Ensures maximum trailer light brightness
• Powers the trailer’s stop, turn, tail and running  lights without overloading vehicle electrical systems
• Compatible with: 
  • 2 & 3 wire systems
  • PWM
  • Multiplex
  • LED tail lights

IDENTIFYING THE NEED FOR MODULITE

• Today’s vehicles have light gauge wire
• Computerized vehicle sensors monitor electrical  current draw
• Without ModuLite the sensors may give false readings
• Adding additional towing lights w/o ModuLite  may overload the system
• System problems and failure may occur  without ModuLite

HOW IT WORKS

ModuLite connects directly to vehicle’s battery &  powers the towing lights
ModuLite provides from 2 .1 to 16 amps of power  per circuit to the trailer lights, depending on the unit

INSTALLATION

ModuLite power modules typically install in 30 to  45 minutes depending on the ease of routing the power  supply wire from the battery to the rear of the vehicle .

WHEN YOU NEED MODULITE

• Trailer has more than one light assembly per side and  is equipped with multiple clearance or running lights
• If the tow vehicle may tow a variety of different trailers
• Vehicle is equipped with lamp out sensors or  other electronic devices that could be damaged  by voltage fluctuations
• Owners manuals caution against adding additional  loads to electrical circuits

 TRAILER AMPERAGE REQUIREMENTS - INCANDESCENT

TRAILER AMPERAGE REQUIREMENTS - LED

WITHOUT MODULITE

•  All the additional power required to supple the trailer lights (represented by the red line) pass through the vehicle’s electrical system including the fuse panel, turn signal switch, taillight harness and lamp out sensor if so equipped

WITH MODULE

• All the additional power required to supple the trailer lights (represented by the green line) is supplied directly from the battery .  Only a small amount of power is required from the fuse panel, turn signal switch, taillight harness and lamp out sensor if so equipped, to signal when to illuminate the trailer lights